08 passat remote start issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123449
Printed Date: July 04, 2025 at 3:48 AM
Topic: 08 passat remote start issue
Posted By: vinnyboombatz
Subject: 08 passat remote start issue
Date Posted: September 10, 2010 at 2:55 PM
My friend has an issue on his 2008 VW Passat Wagon remote starter that he had installed at a local stereo shop. The system remote starts the car as it should, however, every time he opens the door to get in the car after he has remote started it, the car shuts down. I haven't looked at the wiring yet as he is going to take it back to the stereo shop to see if they can/will fix it. I'm almost surprised that any installer would ask for payment for a remote start system install that performs in this way: It totally defeats the purpose. He still has to start the car normally after getting into it! If anyone has some ideas on where I should focus if & when I need to troubleshoot it, I would much appreciate it.
Thanks!
Replies:
Posted By: vinnyboombatz
Date Posted: September 10, 2010 at 3:00 PM
Also, if anyone has the wiring breakdown for this vehicle I would appreciate having it available. I didn't see it posted as available in the wiring diagram section.
Posted By: chev104275
Date Posted: September 11, 2010 at 8:37 PM
Is this push button start ? I've done a few new Lincoln mks push button starts using the new ford starter system. And they shut down the car when ever you open any if the doors or trunk. Then you need to restart the car when you get in.
-------------
If i Can't Install it I Don't need it Joe
Posted By: kreg357
Date Posted: September 11, 2010 at 8:47 PM
Bulldog Security has a wiring guide for your VW. Here is a link to their site : https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
------------- Soldering is fun!
Posted By: Velocity Motors
Date Posted: September 12, 2010 at 12:01 AM
Installer probably installed the door trigger to the hoodpin or the brake wire to purposely shut the vehicle down so that the car doesn't see two keys at the same time. Not sure why he did this?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: vinnyboombatz
Date Posted: September 13, 2010 at 12:39 PM
chev104275 wrote:
Is this push button start ? I've done a few new Lincoln mks push button starts using the new ford starter system. And they shut down the car when ever you open any if the doors or trunk. Then you need to restart the car when you get in.
Thanks to everyone for the help thus far!
This car does have the push button start. Can anyone confirm a successful install on this vehicle without the shutdown problem when a door is opened?
Posted By: chev104275
Date Posted: September 13, 2010 at 12:54 PM
im not sure on those cars but with the lincoln/ford push start just dont hook up the door trigger wires but you still need to hit the brake then manually start the car again so there really is no point in unhooking the door trigger
-------------
If i Can't Install it I Don't need it Joe
|