2003 town and country, directfax 1083

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123463
Printed Date: May 09, 2025 at 1:02 PM

Topic: 2003 town and country, directfax 1083

Posted By: eljefeguero
Subject: 2003 town and country, directfax 1083
Date Posted: September 11, 2010 at 12:21 PM

I am instaling a viper 5701 in a 03 t&c the problem i am having is which wires from 5701 to the realay to use, it asks for a ign3 (-) onto the relay, which is this? and also theres is a starter output and input oon the 5701, the 1083 document only ask for starter from rcs, do i use oth or is one not needed?

thank you
eljefeguero

Replies:

Posted By: icearrow6
Date Posted: September 11, 2010 at 12:42 PM

This is a pdf file about this. I think you meant the STARTER 2, and no the ign 3.
https://www.bulldogsecurity.com/diagrams/extrainfo/diagrams/11144_TOWN-&-COUNTRY_CHRYSLER%20MINI%20VAN%20STARTER%202%20DIAGRAM.pdf

posted_image

-------------

Posted By: eljefeguero
Date Posted: September 11, 2010 at 1:42 PM

wow the 1083 document shows it different wiwth the resistor to ground, hmmm

thanks for reply
eljefeguero

Print Page | Close Window