python 991, 2010 dodge ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123464
Printed Date: May 11, 2025 at 7:27 AM

Topic: python 991, 2010 dodge ram

Posted By: phillymac23
Subject: python 991, 2010 dodge ram
Date Posted: September 11, 2010 at 2:25 PM

I had a Python 991 installed in a 2010 Dodge Ram. Everything works great but I noticed that the installed zip tied the brain under the dash and used T and crimp connectors and zip tied the wires. I doesn't look bad but from all the videos I watched on you tube this is a no no. Should I be concerned?

Thanks

Replies:

Posted By: t&t tech
Date Posted: September 11, 2010 at 4:31 PM

Well generally these connectors are a "no, no," for guys who have passion for doing their work the right way the first time, (which leaves your installer out of this bracket), they may eventually loosen over time and the connections can fall apart, leaving you in problems, and they aren't any where near as safe and reliable as if the connections were soldered and taped, period.

Print Page | Close Window