2010 vw jetta ignition harness
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123487
Printed Date: May 16, 2024 at 2:35 AM
Topic: 2010 vw jetta ignition harness
Posted By: captain d2
Subject: 2010 vw jetta ignition harness
Date Posted: September 13, 2010 at 1:21 PM
Hi everyone. Been looking through these forums for a method of removing that black box from the steering column. There is no way that there is only the one torx screw holding that thing on. It seems like there are connectors attached to it, but something in the middle is holding fast to this box.
Anybody have a lot of experience removing these? I'm tempted by soldering the wires to the pins on the open side of the ignition harness's plug and avoid removing this box at all.
Replies:
Posted By: tedmond
Date Posted: September 13, 2010 at 4:42 PM
im pretty sure the new vw have aitbags at the knee bolster. careful when removing.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Posted By: Velocity Motors
Date Posted: September 14, 2010 at 8:54 PM
If the 2010 is the same body style as the 06/07 then you do not need to remove the black box. You can grab all the ignition wires are the base of the black box connector. This is where I normally get mine.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|