viper 5901 on chrysler 300?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123574
Printed Date: July 07, 2025 at 10:25 PM

Topic: viper 5901 on chrysler 300?

Posted By: shongboy
Subject: viper 5901 on chrysler 300?
Date Posted: September 18, 2010 at 6:54 PM

i just ordered a new viper 5901 for my 05 chrysler 300. it doesn't have a factory alarm just keyless entry. i also ordered a canmax400 module and the xkloader2 to put the firmware on it. just wondering if there is anything else i'll need to do this install and any tips/tricks while doing it? this will be my first time installing an alarm/remote starter. thanks guys

Replies:

Posted By: android67
Date Posted: September 19, 2010 at 1:13 PM

No expert here, but I purchased the same for my Jeep Cherokee and I also picked up a Xpress Key for the CANMAX400 that may save you some headaches.

Print Page | Close Window