remote start issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123575
Printed Date: July 07, 2025 at 5:41 AM
Topic: remote start issues
Posted By: fperezii
Subject: remote start issues
Date Posted: September 18, 2010 at 7:27 PM
I have a 1985 Cutlass Supreme, and I am having trouble with the remote start working properly. The car will crank over, but will not start. I understand that some carburator cars are tuff to start. But if I put the key in and turn it forward to the on position,the car will start with no problems when I use the remote start. What could this be? Do I have it wired wrong, I wired it to the starter wire like shown. Please let me know, thanks.
------------- "Turn N Heads" 2009 WEGO Radical Champion
Replies:
Posted By: i am an idiot
Date Posted: September 18, 2010 at 8:24 PM
|
WIRE |
|
COLOR |
|
POLARITY |
|
LOCATION |
|
 |
 |
Battery |
|
RED |
|
(+) |
|
IGNITION SWITCH HARNESS |
|
|
 |
Ignition 1 |
|
PINK |
|
(+) |
|
IGNITION SWITCH HARNESS |
|
|
 |
Accessory 1 |
|
ORANGE |
|
(+) |
|
IGNITION SWITCH HARNESS |
Posted By: i am an idiot
Date Posted: September 18, 2010 at 8:25 PM
Using a volt meter verify that there is voltage on the pink wire while under an attempted remote start.
Posted By: Thack79
Date Posted: September 20, 2010 at 1:45 PM
If you didnt run tach wire, check your voltage timing
Posted By: kgerry
Date Posted: September 22, 2010 at 6:18 PM
sounds like you didnt power a required IGN wire.......
------------- Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
Posted By: fperezii
Date Posted: September 24, 2010 at 7:53 AM
Thanks for all the help.
------------- "Turn N Heads" 2009 WEGO Radical Champion
|