2004 kia sorento remote starter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123616
Printed Date: May 15, 2024 at 12:49 AM

Topic: 2004 kia sorento remote starter

Posted By: timo123451
Subject: 2004 kia sorento remote starter
Date Posted: September 21, 2010 at 12:53 PM

I am in the process of ordering a remote start for my Sorento. I am looking at a Galaxy 2000rs-2w1. Would it be benefical to order the ADS custom bypass module that is offered with it? It also has the option of having them add the door locks to the bypass. My other thought was to order one from xpresskit that would probably be a little cheaper but wouldn't be preprogramed. Any suggestions? Thanks

Replies:

Posted By: tedmond
Date Posted: September 21, 2010 at 6:21 PM

very easy to install on without a data module.

you only need one to do the bypass.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: timo123451
Date Posted: September 21, 2010 at 7:43 PM

Thanks for the help Tedmond. Are you saying that this remote starter can be installed without a bypass module? I have only installed one remote start and that was about ten years ago so I am just a little rusty on the process. It seems to me that it would be easier with the bypass but I'm still in the process of figuring eveything out. Thanks

Posted By: t&t tech
Date Posted: September 21, 2010 at 8:48 PM

No you need the bypass for the transponder system, the rest can be hardwired if you do not decide to use a data bypass.

Posted By: tedmond
Date Posted: September 22, 2010 at 8:34 AM

you will need a bypas module, you do not need a data module for door locks, FAD, etc.

as T&T mentioned, all the necessary wires can be hardwired at the ignition or drivers kick. when i did this vehicle, most if not all were at the knee bolster. shoot me a pm, ill get you a wiring diagram with pictures. i have it when i installed it from autostart.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Print Page | Close Window