firmware update for cm6000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123627
Printed Date: May 17, 2024 at 12:10 PM

Topic: firmware update for cm6000

Posted By: tianot
Subject: firmware update for cm6000
Date Posted: September 22, 2010 at 8:01 AM

hello guys, anybody here know how to update the firmware for cm6000? im having a problem programming my cm6000 unit using my op500. i dont have a firstech account.

i have a idatalink weblink updater and a y cable.

thanks

-------------
tianot

Replies:

Posted By: tedmond
Date Posted: September 22, 2010 at 8:26 AM

with the adsusb adapter you should be able to upgrade the brain from idatalinks website with weblink.

do you have a blade module in it?

if not you need a valet switch and the y cable from the op500

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert

Posted By: tianot
Date Posted: September 22, 2010 at 9:08 AM

ted,

i dont have a blade module. i have the op500, the y cable and the ads usb cable.

what is the valet switch? is that the switch from the cm6000 unit or the switch from op500?

if the valet switch from the cm6000 your talking about, how can i update the firmware of the cm6000?

thanks

-------------
tianot

Posted By: phil6710
Date Posted: September 24, 2010 at 10:57 PM

you should be able to program the compustr with out updating if you want to update it connect theantenna wire from the compustar to the uart(RS232) port and the other end to the weblink updater then goto idattalink.com and "Flash your module" A quick question, what option are you tring to program?

Print Page | Close Window