remote start clicking
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123679
Printed Date: June 18, 2025 at 5:25 PM
Topic: remote start clicking
Posted By: dbgne
Subject: remote start clicking
Date Posted: September 26, 2010 at 4:22 PM
Installing a Code Alarm CA610 in a 2003 F150 4X4. Alarm and door locks are working fine but when try to remote start all I get is several clicks from the unit? Thinking problem might be in the 4 Pin Harness, which includes Factory Disarm, Factory Re-arm, Pulse After Shutdown and Pulse During Crank. Any suggestions?
Replies:
Posted By: buddholly
Date Posted: September 26, 2010 at 4:33 PM
Did you use an immobilizer?
Posted By: dbgne
Date Posted: September 26, 2010 at 4:49 PM
Have not hooked it up yet, I believe the the truck should turn over but not start, and if you leave a key in the ignition it will start. Tried both ways but all I get is a clicking (relays) from the unit. What about the 4 pin harness I mentioned in my post, how should that be hooked up? Thanks
Posted By: kreg357
Date Posted: September 26, 2010 at 5:11 PM
Does the truck have the factory alarm? If not, the first two outputs are not used.
Pulse after Shutdown is usually used for RAP. That wouldn't affect the start sequence.
Why not program and / or set up the bypass and see what happens? ------------- Soldering is fun!
Posted By: buddholly
Date Posted: September 26, 2010 at 5:11 PM
I'm not too familiar with the Code Alarm systems but I don't believe that the 4 pin harness needs connected at all. I really just think you need to use the immobilizer.
Posted By: blanx218
Date Posted: September 26, 2010 at 7:03 PM
does the remote start have manual transmission mode? alot of DEI r/s have it and its the default setting. it will click and flash the parking lights until that feature is changed. having a bypass or not, the ignition should still turn on and crank on an 03 f150
Posted By: tedmond
Date Posted: September 27, 2010 at 5:18 PM
use your good old dmm and see if the start, ign wires on the unit are infact powering up.
-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
|