5901 w/ canmax400 on 07 tl problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123691
Printed Date: May 02, 2025 at 6:43 AM

Topic: 5901 w/ canmax400 on 07 tl problem

Posted By: Devilchrist
Subject: 5901 w/ canmax400 on 07 tl problem
Date Posted: September 28, 2010 at 10:15 AM

I did this install myself. and have done installs on 2 other honda's

BUT this is the first time however with CANMAX400. All alarm triggers, lock/unlock are running off the CANMAX400 in D2D connection.

PROBLEM: When I activate remote start it unlocks doors, starts the car, then relocks.

Is this common with Honda cars? Do I have the wrong firmware on the CANMAX? I DL'ed the one from xpresskits.com by going through the car selection.

Thanks for your help.

Replies:

Posted By: godd dan it
Date Posted: September 28, 2010 at 5:23 PM

If you dont want it to do that.....reprogram/change the settings on the alarm/remote starter.

-------------

Posted By: kgerry
Date Posted: September 29, 2010 at 10:15 AM

i've had that happen on many Honda's and Acura's.... pulsing disarm unlocks the door... then it relocks after crank..... not an issue for most customers

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Print Page | Close Window