2008 nissan altima push start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123711
Printed Date: May 16, 2024 at 12:39 AM

Topic: 2008 nissan altima push start

Posted By: navy01z
Subject: 2008 nissan altima push start
Date Posted: September 29, 2010 at 10:09 AM

I installed a Avital 5103 in a 2008 Altima with push button start last week. I used the Fortin can-sl2 and Fortins website guides for wiring. I followed everything on their site seeing as how they ev en give you pictures lol and upon completetion the car seemed to work fine. The next day the customer calls and says the SES light is on, the car is hesitating and the key light is staying on now. I followed Fortins update sheets and cut the key light wire like they said. Not sure where to go from here. Any help would be appreciated.

Replies:

Posted By: 91stt
Date Posted: September 29, 2010 at 5:15 PM

since the ses light is on, pull the codes to see why it is on

-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.

Posted By: navy01z
Date Posted: September 30, 2010 at 11:10 PM

I got the car in the bay today, pulled the dash apart and went thru every wire after I reset the car. Found 2 bad diodes on the negative starter and negative ignition. Replaced them and it works mint now. Im a HUGE Directed fan but the Fortin stuff and tech docs are awesome.