Print Page | Close Window

2011 subaru legacy keyless bypass.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123756
Printed Date: April 28, 2024 at 6:56 PM


Topic: 2011 subaru legacy keyless bypass.

Posted By: the12voltuser
Subject: 2011 subaru legacy keyless bypass.
Date Posted: October 02, 2010 at 3:16 PM

So I've been looking around for a bypass for my 2011 Subaru Legacy (same as 2010) and I was told that there are no keyless options available with the exception of one which required a dealer scan tool. Today I came across ADS-AL(DL)-SUB. Is this all I'm required to hook up to my remote starter system in order to bypass or am I missing something?

Thanks in advance.



Replies:

Posted By: kreg357
Date Posted: October 02, 2010 at 9:21 PM

The iDatalink ADS AL CA loaded with the ADS AL(DL) SUB firmware will not do the transponder function.  It will do the Alarms, Doors, Trunk and supply a Tach signal and the Door, Trunk, Brake and E-Brake status's.

There is a solution coming out very shortly from iDatalink called Klon.  It will bypass the transponder system without loosing a key or needing a Dealer Scan Tool.  However, you must be a authorized iDatalink Installer to perform this process with their ADS TB module.

I tell my friends to ask  the Salesman to throw in an extra valet key as part of the purchase just before agreeing to sign the sales contract...



-------------
Soldering is fun!


Print Page | Close Window