programming dlpkgm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123809
Printed Date: July 15, 2025 at 12:40 PM

Topic: programming dlpkgm

Posted By: timo123451
Subject: programming dlpkgm
Date Posted: October 06, 2010 at 2:28 PM

I am installing an Avital 4113 with an express kit DLPKGM into a 99 alero. I will only be using the module for the passlock and nothing else. I plan on using the D2D but I am not sure how to go about programing it since it calls for using the lock button during the programing process? Any suggestions? Thanks

Replies:

Posted By: kreg357
Date Posted: October 06, 2010 at 4:24 PM

Why not go W2W? Its only 3 wires instead of the D2D harness. Then you can skip Step 5 in the programming instructions.

-------------
Soldering is fun!

Posted By: timo123451
Date Posted: October 06, 2010 at 4:28 PM

That's what I will do.....thanks!

Print Page | Close Window