clifford arrow
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123827
Printed Date: May 28, 2024 at 10:02 PM
Topic: clifford arrow
Posted By: 06r1toy
Subject: clifford arrow
Date Posted: October 07, 2010 at 7:39 PM
I just bought a used car with a clifford arrow alarm installed on by-pass. How do I determine which model arrow this is so I can purchase and program remotes?
Replies:
Posted By: howie ll
Date Posted: October 08, 2010 at 2:36 AM
Should be stamped on the alarm brain's casing.
What does the part about by-pass mean? Rather confusing.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 06r1toy
Date Posted: October 08, 2010 at 2:45 AM
sorry, what I mean is it's in vallet mode with toggle switch. All it says on the body is "clifford arrow". it doesnt tell me if it is a 2, 3 or anything else
Posted By: howie ll
Date Posted: October 08, 2010 at 2:50 AM
Turn valet off:
Ign on, press star side twice, plain side once LED should extinguish.
Unfortunately the last three models used the same Siren, unless you have a working remote, the answer stays the same as before.
P.S. If you have a remote, silver colour is 5.1,
black remote is the "Cello" versions 3 and 5.
How old is the vehicle and what is it?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 06r1toy
Date Posted: October 08, 2010 at 3:08 AM
the remote I have is black with two buttons from an old clifford I had years ago.It is installed in a 94 acura integra
Posted By: howie ll
Date Posted: October 08, 2010 at 3:38 AM
You could try it, alarm and valet off, ignition on, press star side twice, plain once, LED will flash, hold star for about 3 secs, siren will chirp, push plain once, chirp after 3 secs, push star once, immediate chirp, press lock/arm on remote, SHOULD get one chirp if it's compatible, press same button again, should get two chirps. Otherwise it's back to my first post.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: October 08, 2010 at 3:38 AM
P.S. If you have a RED LED it should be compatible.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|