avital 4113 will not go into program mode
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123846
Printed Date: May 14, 2024 at 7:58 AM
Topic: avital 4113 will not go into program mode
Posted By: timo123451
Subject: avital 4113 will not go into program mode
Date Posted: October 08, 2010 at 8:40 PM
I'm trying to change some settings on my 4113 but I can't get into program mode. I follow the instructions to the point where you use the transmitter to make the selection but all it does is activate the remote start. I also don't understand how to change from menu 1 to menu 2??? Thanks for the help.
Replies:
Posted By: timo123451
Date Posted: October 08, 2010 at 10:42 PM
Figured it out, the instructions aren't clear on how to get into menu mode.
Posted By: bertobuckeye123
Date Posted: December 12, 2010 at 10:30 AM
How did you get it to go into program mode?
Posted By: timo123451
Date Posted: December 12, 2010 at 11:10 AM
It has been awhile since I installed it but if I rememeber correctly I the first part of the instructions will get you to the menu you want and then on to the feature you need. I was thinking that instructions had named the first part that should be menu as the feature. Hope this helps, it was quite confusing for me and I had to do a bunch of research on the net to find the install manual and to find a forum that someone had posted the correct instructions on the programming.
|