rover mini , hornet 564t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123867
Printed Date: June 11, 2024 at 6:37 AM
Topic: rover mini , hornet 564t
Posted By: max81
Subject: rover mini , hornet 564t
Date Posted: October 10, 2010 at 6:49 PM
Hi All,
New to 12volts and having a bit of trouble with my install and though I'd ask you guys here...
I have installed a Hornet 564T to a Rover Mini all went smooth apart from the Remote Start element. I have found the car has a Lucas 5AS Alarm/Immobiliser and I would like to integrate the Hornet with that. The 564T has a factory alarm disarm wire, however, I have no details of the Lucas 5as and not sure which wire to pulse to disarm.
Any help would be appreciated as this has me stumped at the moment.
Cheers,
Max
Replies:
Posted By: howie ll
Date Posted: October 11, 2010 at 2:48 AM
2 methods here.
Depending on year,there might be an ignition feed to the immobiliser,if so cut it and join the immobiliser end to the constant feed (either purple or brown primary colour).
Second, is there any sort of remote control involved, i.e. do you have to use a remote to free off the immobiliser or or does it automatically release once the key is inserted.
The year of the vehicle would help.
Third is this an auto or manual.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|