presteige xro 9100 probloms
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=123912
Printed Date: April 27, 2024 at 5:48 AM
Topic: presteige xro 9100 probloms
Posted By: sonyguy936
Subject: presteige xro 9100 probloms
Date Posted: October 13, 2010 at 10:56 AM
i have a presteige xro 9100 alram on a 01 dodge ramn .. My problom is when i arm it the alarm goes off for no reason... i have unpluged the shock sensor and it still does it and i have also replaced the key fob batterys and it still does it can anyone shoot me in the right direction.. thanks
-------------
Sony Guy 936
Replies:
Posted By: howie ll
Date Posted: October 13, 2010 at 4:30 PM
Check the door and hood triggers. Check whether any go to ground or stay on ground after closing doors, hood etc, last thing measure the voltage between power and ground on the alarm unit.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: joch1314
Date Posted: October 13, 2010 at 4:39 PM
+1 with howie. one of your triggers is seeing the opposite of what it should be seeing. brown should be connected to ground (-) trigger and purple should be (+). the tech sheet says you should have negative triggers. it shows yellow in the driver kick. try that...what does the OLED remote says triggered the alarm.?
-------------
...half of the truth can be worse than a lie. <----Roger Russell said that..
Posted By: godd dan it
Date Posted: October 13, 2010 at 7:26 PM
How long does the alarm go off after you arm it? And I agree with the above replies.
-------------
|