xk09 05 trailblazer not disarming
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124055
Printed Date: April 18, 2024 at 10:17 PM
Topic: xk09 05 trailblazer not disarming
Posted By: brhaugen
Subject: xk09 05 trailblazer not disarming
Date Posted: October 21, 2010 at 8:39 PM
Got a puzzle and Tech support is basically saying "I don't know"
Installed a 4202p in an 2005 Trailblazer - I used an xk09 with 9.dlpkgm v2.01 - D2D
For some reason it will not disarm the factory security before remote start and with the Unlock.
So far I have switched it to W2W - replaced the unit with another XK09 - checked the functions of all of the RS to BP wires - re-flashed and re-programed several times
Any thoughts - I am just about ready to by an Idatalink and have it over with.
Replies:
Posted By: pitoaudiovisual
Date Posted: October 22, 2010 at 12:31 PM
Dont think the Xk 09 will control the alarm disarm. U might have to connect a factory alarm disarm wire from the remote starter to the light green wire in the door to turn off the factory alarm when remote started.
-------------
Confidence is the key to any project!!
Posted By: cjanke
Date Posted: October 22, 2010 at 7:00 PM
you can use the much cheaper gmdlbp. that will do everything you need.
Posted By: brhaugen
Date Posted: October 25, 2010 at 12:02 PM
The question is has anyone else had this problem?
This truck RS and Bypass combo HAS worked for other people - Correct?
-------------
Brent Haugen
Fargo, ND
|