Print Page | Close Window

rattler 300

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124056
Printed Date: April 25, 2024 at 2:19 PM


Topic: rattler 300

Posted By: screen_abq
Subject: rattler 300
Date Posted: October 21, 2010 at 9:28 PM

I have a rattler 300 installed on 1998 toyota tacoma. I want to deinstall it. what are the correct steps to deinstall it with out frying the ecu. I thought I could just take out all the wiriring?????



Replies:

Posted By: brhaugen
Date Posted: October 22, 2010 at 7:45 AM
In general you need to trace all wires back to their source and cut and tape. Don't leave "dead" wires laying around.
If any wires were cut during the installation - restore them by soldering.
If you are worried about the ECU - disconnect the battery first.

-------------
Brent Haugen
Fargo, ND




Print Page | Close Window