command start 2400/2500 remote?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124057
Printed Date: May 03, 2024 at 1:11 AM
Topic: command start 2400/2500 remote?
Posted By: infernus
Subject: command start 2400/2500 remote?
Date Posted: October 21, 2010 at 9:50 PM
Hey I tried searching the forums and couldn't find anything so I'm sorry if this has been talked about already, I just purchased a 1994 Ford Bronco and it came with a command start but the guy said the remote broke and he no longer had it, I looked at the control module under the dash and it just says Command Start CSI 2400/2500 on it, just wondering if someone could let me know what remote this might use, reading around online I think it uses a CS555 remote but I'd hate to order the wrong one and have it not work. Any help would be greatly appreciated, thanks!
Replies:
Posted By: Velocity Motors
Date Posted: October 22, 2010 at 3:59 PM
Command Start isn't available anymore. We have replacement remotes for that unit at our shop. Where are you in Manitoba?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: infernus
Date Posted: October 22, 2010 at 4:14 PM
I'm in Winnipeg.
Posted By: Velocity Motors
Date Posted: October 22, 2010 at 5:02 PM
Im in Morden. I have a worker that lives out in Windsor Park. Where are you ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dayvid
Date Posted: October 30, 2010 at 3:54 PM
Hey Jeff, Do you know how I can program my remote for Command Start 2400/2500? 91 Sierra with pwr locks. My original remote broke and I picked this one up.... Not too worried about the locks. Thx
Posted By: Velocity Motors
Date Posted: October 30, 2010 at 4:00 PM
Programming Instructions------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dayvid
Date Posted: October 30, 2010 at 4:26 PM
Thx Jeff ...Will I need to use charts 'B and C'?
Posted By: Velocity Motors
Date Posted: November 01, 2010 at 5:25 PM
You will just need chart A for programming. B&C are just optional programming for the unit.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dayvid
Date Posted: November 02, 2010 at 2:17 AM
Thx Jeff, Greatly appreciate your time ...
|