07 caliber ads aldl ch5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124086
Printed Date: May 19, 2024 at 10:00 AM

Topic: 07 caliber ads aldl ch5

Posted By: bruc007
Subject: 07 caliber ads aldl ch5
Date Posted: October 23, 2010 at 1:21 PM

Hi I am installing a remote start in a 2007 Caliber with a ADS-AL(DL)-CH5 bypass from Idata link and have read about C2 rings .My downloaded instructions dont mention it .It is wired directly into the Canbus leads .My other concern was the diode shown in the instructions for isolating the ignition,what type and size will work? Will this module work as shown

Bruce

https://www.idatalink.com/search/index/model/4674

Replies:

Posted By: kreg357
Date Posted: October 23, 2010 at 2:32 PM

Good news. The ADS AL CA does not need the ADS RNG C2 transponder ring for immobilizer bypass.

The diode show in the guide is a 1N4001, available at "the shack".

Some 2007 Calibers had a start wire and would follow the Type 1 install guide, while others did not have the Start wire and would follow the Type 2 install.

-------------
Soldering is fun!

Print Page | Close Window