Print Page | Close Window

automate 6hf rem start crank time issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124267
Printed Date: May 14, 2024 at 2:58 AM


Topic: automate 6hf rem start crank time issue

Posted By: chinamanpat
Subject: automate 6hf rem start crank time issue
Date Posted: November 03, 2010 at 3:49 PM

hey all, im having a problem with my really old automate 6hf alarm/remote start/keyless entry unit.

i believe its close to the viper 140hf as well, but anyway, i can't find the installation manual anywhere for this and out of no where i went to remote start my car and the cars crank time is set too long ( the car will start and the starter will still spin until i disengage the remote start) but if i start the car with the key, its fine. does anyone know how to reset the crank time to .6 seconds?? my alarms brain is so old it doesnt have an input for a bitwriter!!



Replies:

Posted By: chinamanpat
Date Posted: November 03, 2010 at 3:50 PM
this is in a 98 nissan maxima


Print Page | Close Window