1994 nissan quest ignition wire harness
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124294
Printed Date: May 09, 2024 at 4:50 AM
Topic: 1994 nissan quest ignition wire harness
Posted By: tianot
Subject: 1994 nissan quest ignition wire harness
Date Posted: November 05, 2010 at 2:47 PM
hello guys! what should i do if i have more than one wire for the starter wire, accessory wire, and ignition wire, how can i connect those wire into r/s unit. im using a autostart unit. One of the wiring diagram from bulldog it said that im gonna use the 2 starter wire. how about the accesory wire and the ignition wire?
thanks ------------- tianot
Replies:
Posted By: howie ll
Date Posted: November 05, 2010 at 6:40 PM
If the unit only has 1 extra starter or ignition, relay the others, this topic has come up very extensively in the last few weeks.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tianot
Date Posted: November 05, 2010 at 7:48 PM
hi howie! do you have the digram on how to relay the other wire? thanks
-------------
tianot
Posted By: tianot
Date Posted: November 06, 2010 at 1:38 AM
what im trying to do is im gonna connect the r/s starter wire to the two starter wire of the nissan quest, i will joined them together. is that the right way to do it?
-------------
tianot
Posted By: howie ll
Date Posted: November 06, 2010 at 3:30 AM
Of course not unless you want to blow the brains out on your R/S and also do some damage to your car. The manufacturer puts two starter wires in for a reason!
Solder a second wire (smaller gauge) to your R/S starter output wire.
Second wire to relay 86
Good ground to relay 85
Constant 12V+ fused at 20 amps to 87
30 to second starter.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|