honda accord 2000 starter kill wiring
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124314
Printed Date: August 24, 2025 at 8:00 PM
Topic: honda accord 2000 starter kill wiring
Posted By: lochuynh2700
Subject: honda accord 2000 starter kill wiring
Date Posted: November 06, 2010 at 9:52 PM
I really need help fast. I'm trying to install a Clifford Matrix 1x security system. I connected everything but I am still having issues with the Starter Kill. I'm not so sure if i'm suppose to cut the starter wires (blk and white) or am I suppose to cut the ignition wire (black and yellow). I need to cut one of the two wires so I can hook up the Black chassis ground wire and the key switch wire of the Matrix 1x. I also have the ignition wire of the Matrix 1x and I'm not sure where I'm suppose to hook that one up.
Please help me out! Much thanks appreciated
Replies:
Posted By: i am an idiot
Date Posted: November 06, 2010 at 10:06 PM
The only wire you should cut is the Starter wire. It is BLACK/ White.
Posted By: lochuynh2700
Date Posted: November 06, 2010 at 10:11 PM
So should I connect the switch ignition (yellow wire, also connects to the key switch) from the Matrix 1x to the ignition (blk/white)in the Honda?
Thanks for replying!
Posted By: i am an idiot
Date Posted: November 06, 2010 at 10:19 PM
Ignition in the car is BLACK / YELLOW.
Posted By: lochuynh2700
Date Posted: November 06, 2010 at 10:20 PM
Oops typo,
So I should connect it to the blk / YELLOW?
Posted By: i am an idiot
Date Posted: November 06, 2010 at 10:33 PM
If the yellow wire of the alarm is labeled ignition, then yes, that is the wire it should be connected.
|