double pulsed alarm disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124318
Printed Date: June 19, 2025 at 2:36 PM

Topic: double pulsed alarm disarm

Posted By: sean11901
Subject: double pulsed alarm disarm
Date Posted: November 07, 2010 at 11:28 AM

I'm putting a avital 5303 in an 09 hyundai sonata. How to I wire the alarm arm to double pulse. Because this car requires a double pulse to disarm.. thank you!

Replies:

Posted By: sean11901
Date Posted: November 07, 2010 at 11:30 AM

I'm sorry... how do you wire the factory alarm disarm wire from the model to double pulse because the car requires a double pulsed (-) to disarm

Posted By: kreg357
Date Posted: November 07, 2010 at 12:15 PM

Change the 5303 programming. Menu 2 Item 11 to option 2 ( two chirps ). That will give a double disarm pulse at H2/6.

-------------
Soldering is fun!

Posted By: sean11901
Date Posted: November 07, 2010 at 12:26 PM

Ok cool and there are 2 disarm wires in this car what should I do in that siituation?

Posted By: kreg357
Date Posted: November 07, 2010 at 1:01 PM

Split the 5303 disarm output into two legs, each with a 1N4001 diode inline with bands towards the 5303, and connect to the two wires in the DKP.

-------------
Soldering is fun!

Posted By: sean11901
Date Posted: November 07, 2010 at 1:09 PM

What's dkp? Lol

Posted By: kreg357
Date Posted: November 07, 2010 at 1:43 PM

Sorry. Drivers Kick Panel.

-------------
Soldering is fun!

Print Page | Close Window