viper 5902 remote start prob
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124360
Printed Date: May 20, 2024 at 8:15 AM
Topic: viper 5902 remote start prob
Posted By: stone007
Subject: viper 5902 remote start prob
Date Posted: November 09, 2010 at 6:50 PM
Hello,
I just installed a viper 5902 in my 2006 ford expedition. Everything works good except for when the vehicle is running. If I use the key and start it I can't use the pit stop feature. Remote flashes "out of range". Also if I remote start the vehicle, after it runs for a few minutes the remote flashes the same message and wont disarm or shut down etc... Vehicle ran for the set time, shut down and was able to disarm. Only have problems when truck is running for awhile it seems. I am able to remote start and stop the vehicle if I do it within a few seconds
Any ideas?
Replies:
Posted By: t&t tech
Date Posted: November 10, 2010 at 7:33 PM
Have you programmed the turbo mode on?
Posted By: stone007
Date Posted: November 10, 2010 at 7:55 PM
Nope, just double checked.
I did notice that whether I remote start or use the key, after about 15-20 secs I hear a relay click in the module and thats when the unit becomes unresponsive.
|