Print Page | Close Window

viper 350 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124396
Printed Date: May 12, 2025 at 3:28 PM


Topic: viper 350 alarm

Posted By: TooDark
Subject: viper 350 alarm
Date Posted: November 11, 2010 at 12:01 PM

Is there a way to arm/disarm a viper alarm with a neg input from a remote starter? I donot have wiring digram for the viper alarm



Replies:

Posted By: TooDark
Date Posted: November 11, 2010 at 12:51 PM
Does anyone have or know where I can get a viper responder 350 install manual? Or even what the arm/disarm wire coloring is?

Thanks



Posted By: funford
Date Posted: November 11, 2010 at 2:44 PM
Did you try the downloads section of the website?




Posted By: TooDark
Date Posted: November 11, 2010 at 4:03 PM
found it thanks. Still no way to arm/disarm viper alarm with a different remote starter?



Posted By: howie ll
Date Posted: November 11, 2010 at 5:05 PM
No, enter vehicle turn on ignition and press the valet button.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.


Print Page | Close Window