Print Page | Close Window

2005 cobalt r/s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124422
Printed Date: May 05, 2024 at 9:45 AM


Topic: 2005 cobalt r/s

Posted By: coolen
Subject: 2005 cobalt r/s
Date Posted: November 13, 2010 at 10:12 AM

Good day to all:

I'm going to be doing my first Cobalt (05 MT), and it will be my first one. I want to be as sure as I can. So after reviewing the info on this site, this is what I came up with:

2 Button ProStart 3271

6 PIN MAIN HARNESS:
-Red 12v Batt: At BCM J3 Connector pin D1
-Purple 30A Starter Output:N/A
-Red 12v Batt: Same as above
-Yellow Ign Output:Yellow wire in IGN Harness

5 PIN SECONDARY HARNESS
-Black-Ground
-Purple (Tach Input):White at Coil
-Gray (hood pin): Self explanitory
-Orange Brake Switch Input: Light blue driver's kick panel
-Yellow Park Light Output:Brown Driver's Kick panel

12 Pin Accessory Harness:
The only wires I'm going to use out of here are:

Orange Park brake Input: Light Blue Driver's kick panel (BCM J1 Connector pin 14)

I believe also I will be needing a passlock 2 bypass. Does everything up above look ok??

Thanks



Replies:

Posted By: kreg357
Date Posted: November 13, 2010 at 11:33 AM
You came to the right place.  Check out this download from one of the members :  https://www.the12volt.com/installbay/file.asp?ID=717   Everything you ever wanted to know about the Cobalt.

-------------
Soldering is fun!


Print Page | Close Window