wiring door lock/unlock 1999 ford f150
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124437
Printed Date: May 09, 2025 at 11:56 PM
Topic: wiring door lock/unlock 1999 ford f150
Posted By: s13silvia
Subject: wiring door lock/unlock 1999 ford f150
Date Posted: November 13, 2010 at 11:58 PM
I found the wires for the door locks, upper d/s firewall. My remote start wires for door lock/unlock are negative trigger. Do I connect these wires straight up and thats it? Its a 1999 ford f150, with power locks.
Replies:
Posted By: howie ll
Date Posted: November 14, 2010 at 3:34 AM
The info is here, vehicle wiring charts are your friend, use them and don't expect to be spoon fed.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: smokeman1
Date Posted: November 14, 2010 at 7:10 AM
Probably yes. What model of remote start are you using? ------------- When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: howie ll
Date Posted: November 14, 2010 at 7:46 AM
If existing key less entry, neg so your R/S is OK. Use diodes, 1N4004 bands away from R/S.
If not keyless, then 5 wire, use 2 relays as per the instructions on the relay site here or better DEI 451.
Incidentally if you found the wires why are you even asking?
Don't you have a DMM?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: s13silvia
Date Posted: November 14, 2010 at 10:18 AM
howie ll wrote:
If existing key less entry, neg so your R/S is OK. Use diodes, 1N4004 bands away from R/S.
If not keyless, then 5 wire, use 2 relays as per the instructions on the relay site here or better DEI 451.
Incidentally if you found the wires why are you even asking?
Don't you have a DMM?
I have read into it, some people say they are using relays some people not. I do not know what circumstance you would need relays. Thats why I ask.
Posted By: s13silvia
Date Posted: November 14, 2010 at 10:20 AM
smokeman1 wrote:
Probably yes. What model of remote start are you using?
Prostart CT-3271 https://www.autostart.ca/prostart/prod-en_CT-3200.php
Posted By: howie ll
Date Posted: November 14, 2010 at 10:58 AM
I've already given you the answer and you've quoted it. If you don't understand it's not my problem.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: smokeman1
Date Posted: November 16, 2010 at 8:04 PM
Factory Keyless Entry or no Factory Keyless Entry???
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: s13silvia
Date Posted: November 17, 2010 at 6:34 AM
Im guessing no factory keyless entry bought truck used just came with two keys. Anyway to find out if maybe it had keyless and the fob just got lost?
|