2010 toyota sequoia factory remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124460
Printed Date: April 29, 2024 at 10:59 AM
Topic: 2010 toyota sequoia factory remote start
Posted By: tuongtam
Subject: 2010 toyota sequoia factory remote start
Date Posted: November 15, 2010 at 12:34 AM
Hi , I have a factory remote start on this car . But somehow when you start the remote start it works fine but when you try to unlock the car the engine stop . Is there a way to bypass that stage .please help me . Thank you so much
-------------
Tam Nguyen
Replies:
Posted By: Chris Luongo
Date Posted: November 15, 2010 at 10:40 AM
That's normal operation for Toyota remote starters....I think it's stupid but that's the way they do it.
Is it factory-installed or dealer-installed?
If it's dealer-installed, you could try to figure out where/how they connected to the car's door-ajar circuitry, but even that won't help you, I don't think.
That's because I've noticed that even if you sit inside the car with the doors closed and hit the remote starter, as soon as you insert your key into the ignition to take over, it shuts down anyway.
Maybe you could isolate the door-ajar and keysense circuits, but even that wouldn't be guaranteed to work.
Posted By: ExtremeProAudio
Date Posted: November 15, 2010 at 11:11 AM
Do you have a smart key to start your car?
Posted By: tuongtam
Date Posted: November 15, 2010 at 10:01 PM
so , you think there is no other way around it , thank you
|