2006 impala viper 5701 rs, what bypass?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124488
Printed Date: May 18, 2024 at 4:20 AM

Topic: 2006 impala viper 5701 rs, what bypass?

Posted By: danieljaluise
Subject: 2006 impala viper 5701 rs, what bypass?
Date Posted: November 16, 2010 at 1:21 PM

Getting ready to install a Viper 5701 remote start in a 2006 Chevy Impala. The Key has a circle + on it. I have been reading for a couple hours, can't seem to come up with a definitive answer as to which bypass module to use. I have heard XK01, 1701G, 556UW, XK01 + XK06, etc... What is the best method in your opinion?
Do I need to wrap a wire around the ignition cylinder?
I'm looking for the cleanest, quickest option here. Thanks!

Replies:

Posted By: kreg357
Date Posted: November 16, 2010 at 2:33 PM

Your car has the PassKey3+ immobilizer. If you want to stay with DEI products and go D2D, try the DLPK bypass module. Here is a link with the info and the install guide : https://www.xpresskit.com/product.aspx?productid=122

If don't mind going W2W, iDatalink has 3 pre-loaded Solo Series modules that will do everything also. Here is the link : https://www.idatalink.com/helpdesk/ If the car is not used on a regular basis, consider getting the ADS RNG GM3 with the bypass module to reduce power consumption.

-------------
Soldering is fun!

Print Page | Close Window