viper 5301 in 2003 accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124533
Printed Date: May 15, 2024 at 8:03 PM

Topic: viper 5301 in 2003 accord

Posted By: sectechie
Subject: viper 5301 in 2003 accord
Date Posted: November 18, 2010 at 6:21 PM

I recently installed a Viper 5301 and Canmax400 in my 2003 Accord. I followed the directions provided by member 03LXV6 to a T, but cant get the RS to start the car. I programmed it for Auto Trans and programmed the Canmax with one of my keys. If I try to remote start the car with the Key in the ignition and in the on position it will start but it will try to start again while the engine is still on causing a bad grinding noise. I am usinf the D2D cable between the RS and the Canmax400.

Do I need to hook up a GWR wire?

All help is greatly appreciated, thanks for taking the time to read this.

-------------
Ed Holt
POB 210
Laplata, MD

Replies:

Posted By: godd dan it
Date Posted: November 19, 2010 at 12:49 AM

You dont need to hook up the GWR wire when using the D2D cable. Actually everything that says - - - - - on the install guide does not require hook up when using the D2D cable.

Does the door locks and everything else work tho?

-------------

Posted By: sectechie
Date Posted: November 19, 2010 at 5:32 AM

No, the door locks don't work but you can hear the relay clip in the RS Brain and the remote keyfob gives confirmation that the lock and unlock are working.

-------------
Ed Holt
POB 210
Laplata, MD

Posted By: tedmond
Date Posted: November 19, 2010 at 6:39 AM

you didnt program tach yet.

-------------
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert