2011 ford focus dball

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124592
Printed Date: April 20, 2024 at 12:54 AM

Topic: 2011 ford focus dball

Posted By: mark3014
Subject: 2011 ford focus dball
Date Posted: November 21, 2010 at 9:01 PM

Hello,

I have a 2011 Focus that I am installing a Python 991 remote starter on. I also purchased the xpresskit DBALL. I believe I have the older security as the key has only an H stamped in it. When I try to program the dball I get a fast flashing light indicating not supported of can wires incorrectly hooked up. I can not locate a wiring diagram for this vehicle. I have noticed that on some of the other 2011 vehicles have the can high and low in a different position on the dlc. Is this possible on the focus? Does anyone have a wiring diagrm for this vehicle. Thanks for your help

Replies:

Posted By: Chris Luongo
Date Posted: November 21, 2010 at 10:46 PM

Does the key blade have anything stamped on it?

I'm pretty sure most 2011 Fords have the new 80-bit keys. I'm pretty sure the only solution for right now is a key in a box.

I did hear a rumor somewhere that the DBALL has some misprints indicating that it might work on newer Fords.

Posted By: mark3014
Date Posted: November 23, 2010 at 5:54 PM

It does say on their site that the dball will work on 2011 focus. I have also been told by a couple different retailers that it does work but no one has actually installed one. What is the best system to purchase?? I would like to use the D2D if possible.