07 chrysler sebring r/s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124629
Printed Date: May 14, 2025 at 7:32 PM

Topic: 07 chrysler sebring r/s

Posted By: autoapp
Subject: 07 chrysler sebring r/s
Date Posted: November 23, 2010 at 5:10 PM

I installed a one button r/s with a flash logic flcan. got the car to r/s but it cut off and now it wont start with the key or r/s and the key chime continuously rings. as well i cannot reset the flcan. please help...... my customer is waiting........

Replies:

Posted By: t&t tech
Date Posted: November 23, 2010 at 5:39 PM

What happens when you try to start with the key?, have you unpluggd the bypass and and tried starting with the keys?

Posted By: autoapp
Date Posted: November 23, 2010 at 5:42 PM

it will not start with the key when the bypass and r/s are unplugged

Posted By: kgerry
Date Posted: November 24, 2010 at 5:12 PM

i'm not familiar with the flcan... did you have to interrupt any wires?

i had this happen with a Xpresskit module a while back and had to rewire things back the way they were and go with a different mnodule....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: kreg357
Date Posted: November 24, 2010 at 6:19 PM

The FLCAN is a re-badged ADS AL CA. For the 07 Sebring he is running the CH5 firmware, Type 2 install. No wires to cut.... Just connections to CAN Hi, CAN Lo, Ignition and MUX.

-------------
Soldering is fun!

Posted By: kgerry
Date Posted: November 25, 2010 at 8:42 AM

should work fine then... i did an 07 Sebring yesterday with an AL-CA w/CH5 and it worked fine.....

that little immo plug was a bast**d to get plugged back in though...

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: kreg357
Date Posted: November 25, 2010 at 9:23 AM

Hopefully autoapp will post a resolution for the problem. I did a '08 Wrangler with the ADS AL CA w/ CH5 recently. Went very smoothly. Don't think I even disconnected the immobilizer connector as there was enough access room.

-------------
Soldering is fun!