avital 4103 starts, dies, repeat
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124643
Printed Date: May 10, 2025 at 9:03 PM
Topic: avital 4103 starts, dies, repeat
Posted By: nitrosport_5
Subject: avital 4103 starts, dies, repeat
Date Posted: November 24, 2010 at 5:16 PM
Hey, I recently installed an avital 4103 in my 1992 Chevrolet K1500 w/ a TBI 350. This system was working great for a couple of weeks. I more recently installed a new stereo and idk if the battery being unplugged messed with it or what, but now it will start, run for a few seconds, die, sit there for a few seconds and start right back up. The starter also runs slightly longer than it should. After a few days it started just grinding the hell out of the starter/flywheel every time it did that. I have tried to relearn the virtual tach but that does not work. I really need to get this fixed with this cold weather. I'm a paraplegic in a wheelchair and it really makes it a pain to go anywhere when I have to go get in my pickup and let it thaw. What do you guys suggest. Thanks
Replies:
Posted By: t&t tech
Date Posted: November 24, 2010 at 5:20 PM
You have to program tach mode first than relearn the tach signal. It is a tach issue you have there.
Posted By: zerepdivad
Date Posted: November 25, 2010 at 1:32 AM
start the vehicle by hand and hold the programming button for a few seconds. then let go and your parking lights should flash. tach is now learned. if it was actually hooked up properly.......
-------------
A DMM is a beautiful thing.
MECP Advanced Installer Certified.
|