Print Page | Close Window

noob seeking advice 08 charger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124667
Printed Date: August 23, 2025 at 3:48 PM


Topic: noob seeking advice 08 charger

Posted By: just87
Subject: noob seeking advice 08 charger
Date Posted: November 25, 2010 at 10:09 PM

Hey guys. First off, im new and have found ALOT of useful info on this site. My brain is practically fried from reading so much stuff on the internet since getting my new car.

I just picked up an 08 Charger along with a Python 991 alarm/remote start system and Fortin EVO-CHR bypass. Being new to cars in general, I want to get this installed by someone who knows more about car wiring than me.

What exactly should I ask a shop about installing the alarm for me? Is there a certain way my wires should be ran in my car/devices mounted a certain way? Should wires be connected a certain way? (Example: Wires should be soldered and not crimped, correct? And electrical tape = bad?)

I'm scared someone is going to hack up the wires in my car and want to make sure whoever installs my alarm does it properly.

ANY and ALL advice for a noob getting a car alarm installed would be greatly appreciated. My head hurts from Googling. :\



Replies:

Posted By: Thack79
Date Posted: November 26, 2010 at 9:15 AM
take it to a reputable shop and just stand back.



Posted By: just87
Date Posted: November 26, 2010 at 12:01 PM
Thack79 wrote:
take it to a reputable shop and just stand back.


i dont know how to find a reputable shop >.>


Print Page | Close Window