2003 dodge dakota door trigger problems
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12471
Printed Date: May 17, 2024 at 7:08 PM
Topic: 2003 dodge dakota door trigger problems
Posted By: nokturnalkid
Subject: 2003 dodge dakota door trigger problems
Date Posted: April 20, 2003 at 7:14 PM
alrite, did an alarm on a 2003 dodge dakota quad cab. the door triggers is where im having a problem. after you close the door, the trigger is reading what its supposed to. after about 30 seconds, it turns into a ground. which, in turn, sets off the alarm, thinking that the door has been opened. has anyone run into these problems???
Replies:
Posted By: Velocity Motors
Date Posted: April 20, 2003 at 8:08 PM
Did you diode isolate the two door triggers or did you grab the dome light wire ? My information tells me that you have to grab the two door triggers separately and then diode isolate the doors from each other.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: nokturnalkid
Date Posted: April 20, 2003 at 8:19 PM
yep...did that
Posted By: CCRoadshop
Date Posted: April 20, 2003 at 8:23 PM
try looking for a brown wire in the driver side A-Pillar.......this has worked before ....that wire will work both doors
------------- Installer - Circuit City Roadshop(2 1/2 years n counting)
------------------
Alpine CDA7894(soon to be the cda9815)
Pioneer XM unit(soon to be direct link alpine)
Audiovox 995C alarm/remote start
Posted By: Gentleman
Date Posted: April 21, 2003 at 2:40 PM
Had the same problem with my 02 Dakota, did the diode isolation thing and still had the problem then I wired it according to the Winstar diagram posted on this site using a relay and the problem was solved
87 to alarm negative output
85 constant 12 V + fused
86 to door trigger wires diode isolated
30 to ground
Bob
Posted By: Velocity Motors
Date Posted: April 21, 2003 at 2:49 PM
Door Trigger False Alarm Isolation Diagrams Use diagram 1 . ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|