2011 ford super duty
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124711
Printed Date: July 15, 2025 at 11:16 PM
Topic: 2011 ford super duty
Posted By: mobiletint
Subject: 2011 ford super duty
Date Posted: November 28, 2010 at 8:21 PM
I did one of these 6 months ago with a key in the box.
Has anyone a bypass for it yet? anybody else get a "start system fault" during remote start? It works just fine but Id like to bypass the key and get it smoothed out.
Replies:
Posted By: leebunn79
Date Posted: November 30, 2010 at 2:33 PM
FLCAN by flashlogic
-------------
Lee Bunn
Posted By: beegbie
Date Posted: November 30, 2010 at 4:59 PM
leebunn79 wrote:
FLCAN by flashlogic
This is wrong. Key in box is the only solution right now.
Posted By: mobiletint
Date Posted: November 30, 2010 at 5:11 PM
Thanks... looks like the aftermarket is slow as ever on this one.
Posted By: leebunn79
Date Posted: November 30, 2010 at 5:46 PM
I was looking at the 2010.
-------------
Lee Bunn
Posted By: x1le
Date Posted: November 30, 2010 at 6:13 PM
mobiletint wrote:
Thanks... looks like the aftermarket is slow as ever on this one.
I did an f350 today and had the same issue upon remote start.
But wow! that display in the vehicle is nice! haha
Posted By: soundnsecurity
Date Posted: November 30, 2010 at 10:25 PM
wow, i guess ive been out of the game for more time than id like to admit, but to be honest, ive never done a superduty ford, F250 and above, that even needed a bypass. i was wondering when they would ever incorporate antitheft into ford superduty trucks. this is all good to know. awesome
-------------
Posted By: mobiletint
Date Posted: December 01, 2010 at 7:24 AM
I have an 11 edge next week.. I think it has the new key as well. I figure this will go the same as the new toyota G key and drag on for a bit before they get the solution from the manufacturer
|