06 mazda6 alarm goes off during rs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124825
Printed Date: July 12, 2025 at 10:28 PM

Topic: 06 mazda6 alarm goes off during rs

Posted By: dcman41
Subject: 06 mazda6 alarm goes off during rs
Date Posted: December 05, 2010 at 2:52 PM

Hello,

I just finished doing a remote start on a 2006 mazda 6 and all functions work well except the fact that the factory alarm goes off when i remote start the car. The car does remote start and does stay running. Anyone have any ideas ? Can i send the second status output directly to the keysense wire, will that disable the factory alarm during the RS sequence?

Any help is appreciated

Thanks

-Rob

Replies:

Posted By: kreg357
Date Posted: December 05, 2010 at 3:27 PM

You can use the Second Staus Output but will probably need to convert it with a relay from (-) to (+).

AudioVox info :
Alarm Disarm WHITE/ BLUE (+) IGNITION SWITCH HARNESS

Bulldog Info :
KEYSENSE WHITE/ BLUE (+) IGNITION SWITCH HARNESS

FACTORY ALARM DISARM Disarms with KEYSENSE Wire IGNITION SWITCH HARNESS

-------------
Soldering is fun!

Posted By: dcman41
Date Posted: December 05, 2010 at 6:40 PM

Yea, thats exactly what i did. Im having problems with the remote start now though, sometimes the remote start wont start the car. Its like the car barely even cranks. I changed the crank time to 1.0 seconds and it didnt seem to help. Anyone have any ideas ?

Print Page | Close Window