07 f150, autopage730

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124889
Printed Date: May 05, 2024 at 10:18 AM

Topic: 07 f150, autopage730

Posted By: jay_7681
Subject: 07 f150, autopage730
Date Posted: December 07, 2010 at 8:09 PM

i have never installed a car alarm before so i am looking to try my first install.the alarm is autopage 730 on my 07 f150 supercrew i have looked over a few of the wire diagrams and am pretty sure i understand where most of the stuff is comming from and goin to. just not sure about the door triggers if they are connected directly to the brain wires or if the require diodes or relays and if so what do they require ?

Replies:

Posted By: raydawg357
Date Posted: December 14, 2010 at 2:05 PM

Most Fords will require you to diode isolate the door triggers. You actually have to cut the door trigger wires and insert a diode and then place another diode on the trigger wire(s) from the alarm. This will eliminate the alarm from activating when the system falls asleep.

You can bypass this process by connecting the positive trigger wire from alarm to the dome light trigger and not using the door triggers at all.

31B_zaz_untitled.jpg

-------------
Do it right the first time

Print Page | Close Window