Print Page | Close Window

domelight

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12489
Printed Date: May 14, 2024 at 12:02 AM


Topic: domelight

Posted By: Malibu2882
Subject: domelight
Date Posted: April 21, 2003 at 2:54 AM

I need help. I had a GM factory alarm installed but Domelight suppervision was an option(needs relay) Well I wired up the relay and tapped the wires.But the domelight will not come on when the alarm is disarmed. I can hear the relay time out after I disarm (30sec). I have negitive door switches. I wired it up just like the guide said. 87-negative 85 12v fused 30 negitive door trigger, 86 alarm oillumated output, 87a none. I used the wires coming out of the main unit, could this be it? I don't know what I'm doing wrong. Please help! Thanks!



-------------
Dave



Replies:

Posted By: draasch
Date Posted: April 21, 2003 at 5:16 AM
is pin 86 a neg output??


-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: Malibu2882
Date Posted: April 22, 2003 at 1:33 AM
Yes, pin 86 is neg. 200mA illumated output

-------------
Dave


Print Page | Close Window