Print Page | Close Window

Autopage Starter kill for 95 integra

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12492
Printed Date: June 09, 2024 at 12:16 PM


Topic: Autopage Starter kill for 95 integra

Posted By: pregunta
Subject: Autopage Starter kill for 95 integra
Date Posted: April 21, 2003 at 6:18 AM

I am installing an autopage 700lcd on my car.  The starter kill is not working.  I can start the car whether the alarm is disabled on enabled.   I the setup the gave in the install book for the relay is as follows.

87- No connection

86- Black and white wire from alarm

30- Cut wire from ignition

87a- Cut wire to ignition

85- On position from starter.

I don't know if I would need a normally open or closed relay setup.  Mabey that is it. 

If anyone knowy why this doesn't work correctly please let me know.

Finally if any knows where to connect the horn that would be great.  I tried disconnecting different relays to to find the horn (pressing the horn after disconnection to see if it would sound.) but I couldn't find it.

Thanks




Replies:

Posted By: pblargecar
Date Posted: April 21, 2003 at 7:08 AM
switch the relay wires 30 to 87a and 87a to 30 the wire colors are grey or blue/green it neg atthe steering column.



Posted By: pregunta
Date Posted: April 21, 2003 at 12:52 PM

Thanks that was it.


Print Page | Close Window