Print Page | Close Window

stumped on 2010 dodge ram remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124976
Printed Date: May 02, 2024 at 2:44 PM


Topic: stumped on 2010 dodge ram remote start

Posted By: kiteman
Subject: stumped on 2010 dodge ram remote start
Date Posted: December 11, 2010 at 1:13 PM

Ok,  I install a Avital 5303 remote start on a 2010 Dodge Ram and used a CHALL by pass mod..  The alarm and remote start work, but I keep getting a check engine light...  Then today it started and ran for 15 mins then died, failked to start the second time, then I hit the brakes and shut down the remote start and then it would start with the key on the fist start..   Does anyone have a clue??  Some say that there is a second ignition wirre, pink/green  and it's not on all vehicles.. This truck only has the 1 ignition, pink/white..    The only thing that I did was hook up the parking light wires from the alarm, and was not aware the the CHALL did the parking lights some how... I did unhook that and still has the same problem...




Replies:

Posted By: ceasar326
Date Posted: December 11, 2010 at 1:50 PM
Are u using a CHTH2 with ur CHALL bypass?



Posted By: kiteman
Date Posted: December 11, 2010 at 2:18 PM
No..  The 2009 and 2010 have a 1 by them for CHTH1  I hooked it up CHTH1 without D2D



Posted By: kiteman
Date Posted: December 14, 2010 at 6:59 AM
Ok.. The CHALL needs to be flashed and that fixes the issues... I thought that mode was a plug and go, but it depends on how long it sat on the self from where you bought it, as to what up dates are on it....   FYI


Print Page | Close Window