I recently got a Malibu with the remote stater already installed. There is no dealership close enough to my house to take the car to for the remote. The remote will not start the car and once I figured out how to get the error code it flashes 6 times. Of course the user guide for the 1100 goes from 5 to 7 and skips 6 so looking at other guides it mentions a safety function isn't set. The hood pin is rusted and the wire is loose so it's not grounded. I guess it's the input from the brake pedal or the park/neutral input. Since Astro flex don't even respond to owners of the product, does anyone have a copy of the install guide? I found the module and have the wiring diagram but what is causing the code 6? I guess that a faulty signal is coming from one of the two sensors still connected. To pay someone to troubleshoot this would be a waste of money since new units start around $170.00 so I'll troubleshoot a little longer since the car is over 9 years old I would guess the warrenty on the remote is up already.
Any help would be great along with a pdf file LOL
Thanks
-------------
Wired
While re-searching this website....I think I found the guide I need...if it works I'll repost
Thanks towhomever posted the install manual
-------------
Wired
i have just bought a 2002 durango.it has a astro flex 1100 remote start.didnt even no it had one on it till i accidently locked my keys in car an discovered my other remote wouldnt unlock the doors an that it was dif then the factory remote.well i got doors unlocked an was looken arond under dash an found the box.well i had pushed all kinds of buttons on the remote an must have messed it up.so today was curious if culd get it worken i unplugged sumthen from then plugged it in then flipped these little switches on the box an wiglled sum wires around then fliped the switches back except the first one i believe an what do u no it started by itself when press the start buttonso i fliped switch bak like it was an tried it a few more times an it started while it was runnen i lifted hood an it did not shut off less i pushed brake pedal.soo then went out tonite to try it again an it did not start.how do i program the remote or get a free install guide?i already downloaded the user manual but it has nothen in ther to program it.any idea since it dont shut off with hood openculdnt find no switch under hood??
-------------
toby harris