audiovox remote control programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125013
Printed Date: July 05, 2025 at 2:31 AM

Topic: audiovox remote control programming

Posted By: wyciwug
Subject: audiovox remote control programming
Date Posted: December 13, 2010 at 7:34 AM

I have an old audiovox alarm system and I just lost the remote control. Bought one online but they do not have the programming instruction. Couldn't find it anywhere. I am desperately looking for help in programming the remote control. Hope someone here has the instruction, please help.

Audiovox Prestige AS9491. FCC ID: ELV55AAL70GR
Remote control FCC ID: BGAAV2TF

-------------
DCD

Replies:

Posted By: i am an idiot
Date Posted: December 13, 2010 at 12:36 PM

Not sure if this works for that particular model, Ignition switch in the on position, Press and release the valet switch 3 times, there will be an acknowledgement chirp to let you know you have entered programming mode. Press the main button on the remote, it should chirp . Press valet once again, alarm should chirp again, then press aux button if remote has one, alarm should chirp. Turn key off and a different chirp should sound. Check for remote functions.

Print Page | Close Window