2007 jeep liberty?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125042
Printed Date: July 12, 2025 at 10:45 AM

Topic: 2007 jeep liberty?

Posted By: racerman56
Subject: 2007 jeep liberty?
Date Posted: December 14, 2010 at 4:04 PM

Installing compustar 6200 with the Blade Al ds. What's the best way to hook up the parking light wire?

Replies:

Posted By: kreg357
Date Posted: December 14, 2010 at 6:13 PM

Use the CM6200 (+) Parking Light output connected to a relay as per this Bulldog Security diagram ( on right ). https://www.bulldogsecurity.com/diagrams/extrainfo/diagrams/14301_LIBERTY_JEEP%20LIBERTY%20PARKING%20LIGHT%20DIAGRAM.pdf The 2007 needs a 900 ohm resistor. The Libertys' Parking Light wire should be (-)Pink/Red at the switch.

-------------
Soldering is fun!

Print Page | Close Window