bypass problem, 2009 honda accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125047
Printed Date: July 13, 2025 at 1:47 PM

Topic: bypass problem, 2009 honda accord

Posted By: calvinwings
Subject: bypass problem, 2009 honda accord
Date Posted: December 14, 2010 at 3:43 PM

I have a problem with the bypass for Honda accord 2009 model, I am using the Honda SL3 for bypass and Ultra Start 1172XR Pro Auto Remote Car Starter.

I can see the Ignition wire from the R/S and starter wire from R/S connect to the Ignition and Starter of the car in the wire diagram for R/S. Also I can see the Starter wire from the bypass module Honda Sl-3 also connect to the car starter in the wire diagram.Is this the default method ?

Replies:

Posted By: kreg357
Date Posted: December 14, 2010 at 6:04 PM

The Fortin Honda SL3 bypass module has only 2 connections to the car. The PURPLE / White wire goes to the Data wire and the Yellow wire goes to the cars' Ignition wire. The SL3s' Blue wire connects to the Ultra Starts (-) While Running WHITE/ Violet wire. Follow the Type 4 install guide diagram. Also follow the "Installation without Datalink" diagram for +12v and ground. Here is the Honda SL3 Install Guide : https://ifar.ca/download/2690/preview.html

-------------
Soldering is fun!

Print Page | Close Window