2010 mazda3 with smartkey
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125081
Printed Date: July 17, 2025 at 2:37 PM
Topic: 2010 mazda3 with smartkey
Posted By: rich@isp
Subject: 2010 mazda3 with smartkey
Date Posted: December 16, 2010 at 3:55 PM
Greetings fellow enthusiasts/installers!
Was wondering if anyone has attempted with success any of the new Mazdas with P-T-S?
We attempted an install utilizing DEI products the other day, talked with 3 different techs @ DEI, including an "engineer" in Canada's DEI HQ, and nobody could explain/help out.
Unit was a Avital 4103, bypass was DB-ALL. We could get everything working, except the data (s-comm)wire. We got it to initialize programming, would go thru the first 2 steps of programming with the valet keys like the directions read, but once we go to the next step, wihch is the data-feedback step, the bypass times itself out and says it cannot communicate with the vehicle.
Again, we've contacted DEI with little help.
Anyone used a different unit/brand and had success with this vehicle?!?!
Thanks in advance-
-------------
Indy Sound & Performance
Indy's true one-stop custom shop!
317-288-5995
Replies:
Posted By: tonanzith
Date Posted: December 19, 2010 at 12:49 AM
PKAll works.
-------------
Gary Sather
|