Print Page | Close Window

dodge ram 2010

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125132
Printed Date: May 12, 2024 at 6:53 PM


Topic: dodge ram 2010

Posted By: muaiad97
Subject: dodge ram 2010
Date Posted: December 18, 2010 at 10:00 PM

hi guys

i have this truck 2010 ram i need to install  remote starter  it looks hard to install  to me because the wiring diagram  says  no starter wire and no acc wire and no ign wire  required for remote starting  so how the truck will start without these wire  i had to buy  by pass madual it called EVO ALL  i am not sur if this madual can do the starting anyone have done this truck befor so i can get more information. the remote starter is  AUTO START  2 WAY FM.

thanx




Replies:

Posted By: Ween
Date Posted: December 18, 2010 at 10:23 PM
hi,
you may want to see if you can acquire a Flashlogic FLCAN module instead, flashed to your vehicle of course. it makes the install rather basic as the module performs the transponder bypassing, door locks, and ignition switch operations. they also have an interface harness available (FLCHH) that connects inline with the ignition harness to even simplify the install more.
hope this helps
mark



Posted By: muaiad97
Date Posted: December 19, 2010 at 8:55 PM

hi

thanx for replay but still this madual does the starting or not  because i paid $120 for  this madual but still i didnt  work in this truck i am wating for correct diagram .

thanx


Print Page | Close Window