Print Page | Close Window

2007 dodge ram 1500 r/s , xk09

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=125204
Printed Date: April 27, 2024 at 11:33 AM


Topic: 2007 dodge ram 1500 r/s , xk09

Posted By: 97f150ext
Subject: 2007 dodge ram 1500 r/s , xk09
Date Posted: December 22, 2010 at 5:30 PM

Using Avital Remote start, and XK09 bypass.  2007 Dodge Ram 1500.  I have checked all wires for Installation Type 3 for the XK09, and have all wires hooked up correctly.  There is no positive start wire on pin 4 of the 5 pin connector.  The tan and tan/black wires are connected according to the diagram, and so is the violet/brown.  I have metered all other wires and they are working properly.  I cannot get the XK09 to get past the rapid flashing stage while programming.  I have reset the module and re-attempted to prgram with the same results.  What else besides the violet/brown, tan and tan/black wires could be the problem?  These 3 wires are connected as close to their connectors as possible.  Forgot to mention that the Ignition (pin 3) wire is connected as well.  I need some help fast, this truck is setting in my shop as I type.

Thanks,




Replies:

Posted By: calijtee1
Date Posted: December 29, 2010 at 12:35 AM
i hate express!!!!!!!!!!!! ughh!!!!!!!!!!! its not flashed to the right platform.... re flash it with the xk loader on your computer

-------------
installers do it best. we got the magic hands!


Print Page | Close Window